How can we help?

Follow

Testing Your SmartBase and Leak Detectors

SmartBase for Power Outage Test

  • Unplug the power cord from the SmartBase.
  • You will receive a text message that SmartBase has detected a power outage.
  • LED on SmartBase will turn white.

SmartBase test complete. Re-connect power cord.

Leak Detector Test

  • Wet the tip of your finger with water and run your finger along the aluminium rings on the bottom of the leak detector.
  • In a few seconds your leak detector will begin to alarm and the red LED on the cover near the Roost logo will blink.
  • To stop the leak detector alarm from sounding, dry off the metal rings on the bottom of the detector thoroughly, especially the small space between them.
  • Shortly after your Roost leak detector begins to alarm, you should receive a push notification on your smartphone alerting you that there has been a leak.
  • If you don't receive a push notification or a text message within a minute, please check your phone settings to make sure you've allowed push notifications from the Roost App and test again.
  • The leak detector with the tail will alert when water comes in contact with any portion of the tail.
  • To stop the leak detector alarm from sounding, dry off the metal rings on the bottom of the detector thoroughly, especially the small space between them.

Leak detector test complete.

 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments